Equipment use: This unit is suitable for extruding insulation and sheath layer covering of cable cores using hot extrusion method for thermoplastic plastics such as polyvinyl chloride and polyethylene.
| Type | SJ-45DL | SJ-65DL | SJ-90DL | SJ-120DL | SJ-150DL | SJ-200DL |
|
Pay-off specification and model (mm) |
Φ 630 shaftless |
φ 630 shaftless type Or 1600 end of the shaft |
1600 or 2000 end of the shaft |
2500 end of the shaft |
2500 or 3150 end of the shaft |
3150 end of the shaft |
| Screw dia(mm) | 45 | 65 | 90 | 120 | 150 | 200 |
| Length to diameter ratio L/D | 25:1 | 25:1 | 25:1 | 25:1 | 25:1 | 25:1 |
| Extrusion amount (kg) | 40 | 110 | 160 | 300 | 460 | 600 |
| Power of main motor (kw) | 7.5 | 22 | 55 | 110 | 132 | 280 |
| Wire diameter specification (mm) | 1.5-12 | 5-25 | 6-50 | 15-70 | 20-100 | 30-110 |
| Length of water tank(m) | 4 | 8 | 12 | 16 | 20 | 24 |
| Traction method/parameters | φ600mm Wheel type | φ600mm Wheel type or 800kg Pneumatic | 800kg Pneumatic or 1250kg Pneumatic | 1600kg Pneumatic | 2500kg Pneumatic | 3000kg Pneumatic |
| Traction motor power(kw) | 3 | 4 | 5.5 | 7.5 | 11 | 15 |
Equipment use: This unit is suitable for extruding insulation and sheath layer covering of cable cores using hot extrusion method for thermoplastic plastics such as polyvinyl chloride and polyethylene.
ONLINE
Copyright © 2024 by Shandong Caihua Rubber Machinery Co., Ltd.
EN
